3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 5 BGP Configuration Commands
5-35
Description
Use the peer default-route-advertise command to send the default route to the
peer/peer group.
Use the undo peer default-route-advertise command to cancel the existing
configuration.
By default, the default route is not sent to the peer group.
For this command, no default route needs to exist in the routing table. A default route
is sent unconditionally to a peer/peer group with the next hop as itself.
Example
# Configure a peer group named test to generate a default route.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer test default-route-advertise
5.1.38 peer description Syntax
peer { group-name | ip-address } description description-text
undo peer { group-name | ip-address } description
View
BGP view
Parameter
group-name: Name of the peer group, containing 1 to 47 characters.
ip-address: IP address of the peer.
description-text: Description information configured, , containing 1 to 79 characters.
Description
Use the peer description command to configure the description information of the
peer/peer group.
Use the undo peer description command to cancel the description information of the
peer/peer group.
By default, no description information is configured for peers/peer group.
You need to create a peer group before you can configure the description of the peer
group.