3Com Switch 7750 Series
Command Reference Guide – Mirroring Chapter 1 Mirroring Commands
1-6
Related command: display qos-interface mirrored-to, monitor-port
Example
# Mirror packets that match ACL 2000 on port GigabitEthernet1/0/1 to
GigabitEthernet1/0/4 through traffic mirroring.
<3Com> system-view
[3Com] mirroring-group 3 local
[3Com]mirroring-group 3 monitor-port GigabitEthernet 1/0/4
[3Com]interface GigabitEthernet 1/0/1
[3Com-GigabitEthernet1/0/1] qos
[3Com-qosb-GigabitEthernet1/0/1]mirrored-to inbound ip-group 3000 interface
GigabitEthernet 1/0/4
1.1.4 mirroring-group Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
View
System view
Parameter
group-id: Group number of a mirroring group, in the range of 1 to 20.
local: Specifies the mirroring group as a local mirroring group.
remote-destination: Specifies the mirroring group as the destination mirroring group
for remote port mirroring.
remote-source: Specifies the mirroring group as the source mirroring group for remote
mirroring.
all: Deletes all mirroring groups
Description
Use the mirroring-group command to configure a mirroring group.
Use the undo mirroring-group command to delete a mirroring group.
Example
# Configure a mirroring group on the local switch.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] mirroring-group 3 local