3Com 7750 Series 1.2 GVRP Configuration Commands

3Com Switch 7750 Series

Command Reference Guide — GVRP Commands Chapter 1 GVRP Configuration Commands

1-6

Related command: display garp statistics.

Example

# Clear GARP statistics of all ports.

<3Com> reset garp statistics

1.2 GVRP Configuration Commands

Syntax

display gvrp statistics [ interface interface-list ]

View

Any view

Parameter

interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing

this argument in the form of interface-list = { interface-type interface-number [ to

interface-type interface-number ] } &<1-10>, where &<1-10> means that you can

provide up to 10 port indexes/port index lists for this argument.

Description

Use the display gvrp statistics command to display the GVRP statistics of specified

or all trunk ports.

This command displays the following information:

z GVRP status

z Whether GVRP is running

z Number of the GVRP entries that fail to be registered

z Source MAC address of the previous GVRP PDU

z GVRP registration type of a port

Example

# Display the GVRP statistics of port Ethernet1/0/1, assuming that the port is a trunk

port.

<3Com> display gvrp statistics interface Ethernet1/0/1

GVRP statistics on port Ethernet1/0/1

GVRP Status : Enabled

GVRP Running : Yes

GVRP Failed Registrations : 0