3Com Switch 7750 Series
Command Reference Guide – Multicast Chapter 2 Common IP Multicast Configuration Commands
2-6
Field Description
Total 1 entries Total number of entries
00001 Serial number of an entry
(10.0.0.4, 225.1.1.1) (s,g)
iif Vlan-interface2, 0 oifs
The incoming interface of the multicast
forwarding table is Vlan-interface 2, and
the multicast forwarding table does not
have an outgoing interface.
Matched 122 pkts(183000 bytes), Wrong
If 0 pkts
Forwarded 122 pkts(183000 bytes)
122 packets which are 183,000 bytes in
all match the (s, g) entry, and 0 wrong
packet matches with the (s, g) entry.
122 packets which are 183,000 bytes in
all are forwarded.
Syntax
display multicast routing-table [ group-address [ mask { mask | mask-length } ] |
source-address [ mask { mask | mask-length } ] | incoming-interface { interface-type
interface-number | register } ]*
View
Any view
Parameter
group-address: Multicast group address to specify a multicast group and display the
routing table information corresponding to this group, in the range of 224.0.0.0 to
239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Specifies the incoming interface of the multicast routing entry.
register: Registration interface of PIM-SM.
Description
Use the display multicast routing-table command to display the information about
the IP multicast routing table.
This command is used to display the information about the multicast routing table, while
the display multicast forwarding-table command is used to display the information
about the multicast forwarding table.