3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 2 RIP Configuration Commands
2-2
System View: return to User View with Ctrl+Z.
[3Com] rip
[3Com-rip] undo checkzero
2.1.2 default cost Syntax
default cost value
undo default cost
View
RIP view
Parameter
value: Default routing cost to be set, ranging from 1 to 16. It is 1 by default.
Description
Use the default cost command to set the default routing cost of imported routes.
Use the undo default cost command to restore the default value.
If no routing cost is specified when you use the import-route command to import
routes from another routing protocol, the routes will be imported with the default
routing cost specified with the default cost command.
Related command: import-route.
Example
# Set the default routing cost of the routes imported from other routing protocols to 3.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] rip
[3Com-rip] default cost 3
2.1.3 display rip Syntax
display rip
View
Any view
Parameter
None