3Com Switch 7750 Series
Command Reference Guide – 802.1x Chapter 1 802.1x Configuration Commands
1-16
View
System view, Ethernet port view
Parameter
logoff: Disconnects a supplicant system if it logs in through a proxy or through multiple
network cards.
trap: Sends Trap packets if a supplicant system logs in through a proxy or through
multiple network cards.
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-name [ to interface- name] & < 1-10 >.
The interface-name argument is the port index of an Ethernet port and can be specified
in this form: interface-name = { interface-type interface-num }, where interface-type
specifies the type of a port and interface-num identifies the port number. "&<1-10>"
means that up to 10 port indexes/port index lists can be provided.
Description
Use the dot1x supp-proxy-check command to enable the checking and access
control of the users who log in through a proxy.
Use the undo dot1x supp-proxy-check command to cancel the setting.
By default, 802.1X client checking is disabled for all Ethernet ports.
In system view, execution of the dot1x supp-proxy-check command enables the
supplicant system proxy checking function for specified ports if the interface-list
argument is provided; in Ethernet port view, the interface-list argument is not needed,
only the current port can have the function.
In system view, after enabling global supplicant proxy checking, you also need to
enable this function on specific ports for the function to take effect on these ports.
802.1x proxy checking checks for:
z Supplicant systems logging in through proxies
z Supplicant systems logging in through IE proxies
z Whether or not a supplicant system logs in through multiple network cards (that is,
when supplicant system attempts to log in, it contains more than one active
network cards)
A switch may take the following actions in response to any of the above three cases:
z Disconnects the supplicant system and sends Trap packets (using the dot1x
supp-proxy-check logoff command.)
z Sends Trap packets without disconnecting the supplicant system (using the dot1x
supp-proxy-check trap command.)
This function needs the support of 802.1x clients and CAMS: