3Com Switch 7750 Series
Command Reference Guide — Link Aggregation Chapter 1 Link Aggregation Configuration Commands
1-4
AL AL Partner ID Select Standby Share Master
ID Type Ports Ports Type Port
-------------------------------------------------------------------
1 D 0x8000,00e0-fcff-ff01 1 0 NonS Ethernet4/0/1
10 M none 1 0 NonS Ethernet4/0/2
20 S 0x8000,00e0-fcff-ff01 1 0 NonS Ethernet4/0/3
Table 1-3 Description on the fields of the display link-aggregation summary
command
Field Description
Actor ID Local device ID
AL ID Aggregation group ID
AL Type Aggregation group type: D (dynamic), S (static), or M (manual)
Partner ID ID of the remote device
Select Ports Number of the selected ports
Standby Ports Number of standby ports
Share Type Load sharing type: Shar (load-sharing), or NonS
(non-load-sharing)
Master Port Number of the master port
Syntax
display link-aggregation verbose [ agg-id ]
View
Any view
Parameter
agg-id: ID of the aggregation group to be displayed, which must be the ID of the
existing aggregation group, in the range of 1 to 384.
Description
Use the display link-aggregation verbose command to display the details about a
specified aggregation group, including:
z Aggregation group ID, aggregation group type, load sharing type, aggregation
group description string;