3Com Switch 7750 Series
Command Reference Guide — Link Aggregation Chapter 1 Link Aggregation Configuration Commands
1-9
1.1.9 link-aggregation Syntax
link-aggregation interface-type interface-number to interface-type interface-number
[ both ]
View
System view
Parameter
interface-type: Port type.
interface-num: Port number.
to: Specifies a series of contiguous ports.
both: Performs load sharing for both inbound traffic and outbound traffic on all
member ports in the aggregation group.
Description
Use the link-aggregation command to add a series of ports to a new manual
aggregation group, to which the system assigns a new group number. The
link-aggregation group agg-id mode command and the port link-aggregation
group command can be used together to implement the function of the
link-aggregation command.
By default:
z For IP packets, the system performs load sharing based on IP addresses;
z For non-IP packets, the system performs load sharing based on MAC addresses.
Example
# Set up an aggregation group with Ethernet1/0/1 to Ethernet1/0/4 and perform load
sharing for both inbound and outbound traffic of the aggregation group.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] link-aggregation ethernet1/0/1 to ethernet1/0/4 both
1.1.10 link-aggregation group description Syntax
link-aggregation group agg-id description agg-name
undo link-aggregation group agg-id description