3Com 7750 Series 1.2 Static Route Configuration Commands

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 1 Static Route Configuration Commands
1-15
1.2 Static Route Configuration Commands
1.2.1 delete static-routes all
Syntax
delete static-routes all
View
System view
Parameter
None
Description
Use the delete static-routes all command to delete all static routes.
The system will request your confirmation before it deletes all the configured static
routes.
Related command: ip route-static and display ip routing-table.
Example
# Delete all the static routes in the router.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] delete static-routes all
Are you sure to delete all the unicast static routes?[Y/N]y
1.2.2 ip route-static
Syntax
ip route-static ip-address { mask | mask-length } { interface-type interface-number |
next-hop } [ preference preference-value ] [ reject | blackhole ]
undo ip route-static ip-address { mask | mask-length } [ interface-type
interface-number | next-hop ] [ preference preference-value ] [ reject | blackhole ]
View
System view
Parameter
ip-address: Destination IP address, in dotted decimal notation.
mask: Mask.