3Com 7750 Series 1.1.6 info-center channel

3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-7
Example
# Display the trapbuffer status and the trap information in trapbuffer.
<3Com> display trapbuffer
Trapping Buffer Configuration and contents:enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuffer
dropped messages : 0
overwritten messages : 0
current messages : 6
#Dec 31 14:01:25 2004 3Com DEV/2/LOAD FINISHED:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.20: frameIndex is 0, slotIndex 0.4
#Dec 31 14:01:33 2004 3Com DEV/2/BOARD STATE CHANGE TO NORMAL:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.11: frameIndex is 0, slotIndex 0.2
#Dec 31 14:01:40 2004 3Com DEV/2/BOARD STATE CHANGE TO NORMAL:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.11: frameIndex is 0, slotIndex 0.
…(Omitted)
1.1.6 info-center channel
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Channel name, a string up to 30 characters, excluding "-", "/" or "\".
And the first character must not be a number.
Description
Use info-center channel name command to name a channel specified by the
channel-number as channel-name.
Use undo info-center channel command to restore the default channel name.