3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-17
Example
# Configure an IPX static route, with the destination network number being 0x5a, next
hop being 675.0-0c91-f61f, tick value being 10 and hop count being 2.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] ipx route-static 5a 675.0-0c91-f61f tick 10 hop 2
3.1.16 ipx sap disable Syntax
ipx sap disable
undo ipx sap disable
View
VLAN interface view
Parameter
None
Description
Use the ipx sap disable command to disable SAP on the current VLAN interface.
Use the undo ipx sap disable command to enable SAP on the current VLAN
interface.
By default, SAP is enabled as soon as IPX is enabled on the VLAN interface.
Example
# Disable SAP on VLAN interface 1.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2] ipx sap disable
3.1.17 ipx sap gns-disable-reply Syntax
ipx sap gns-disable-reply
undo ipx sap gns-disable-reply
View
VLAN interface view