3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-52
undo timer response-timeout
View
RADIUS scheme view
Parameter
seconds: Response timeout time of RADIUS servers, ranging from 1 second to 10
seconds. By default, the response timeout time of the RADIUS server is three seconds.
Description
Use the timer response-timeout command to set the response timeout time of
RADIUS servers.
Use the undo timer response-timeout command to restore the default response
timeout timer of RADIUS servers.
Note that:
z If the switch gets no response from the RADIUS server after sending out a
RADIUS request (authentication/authorization request or accounting request) and
waiting for a time, it should retransmit the packet to ensure that the user can obtain
the RADIUS service. This wait time is called response timeout time of RADIUS
servers; and the timer in the switch system that is used to control this time is called
the response timeout timer of RADIUS servers. You can use the timer
response-timeout command to set the timeout time of this timer.
z Appropriately setting the timeout time of this timer according to the network
situation can improve the performance of the system.
z This command has the same effect with the timer command.
Related command: radius scheme and retry.
Example
# Set the response timeout time in the RADIUS scheme radius1 to five seconds.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] timer response-timeout 5
1.2.29 user-name-format Syntax
user-name-format { with-domain | without-domain }
View
RADIUS scheme view