3Com Switch 7750 Series
Command Reference Guide – Configuration File Management Chapter 1 Configuration File Management
Commands
1-8
#
ospf 1
#
ip route-static 10.12.0.0 255.255.0.0 Ethernet 12/0/0
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode none
#
return
The configurations listed above are global configuration, port configuration and user
interface configuration respectively.
1.1.3 display this Syntax
display this
View
Any view
Parameter
None
Description
Use the display this command to display the running configuration of the current
view. If you need to authenticate whether the configurations is correct after you have
finished a set of configurations under a view, you can use the display this command
to view the running parameters.
Some effective parameters are not displayed if they are the same with the default
ones, while some parameters, though have been configured by the user, if their
related functions are not effective, are not displayed either.
Associated configuration of the interface is displayed when executing the command
in different interface views; related configuration of the protocol view is displayed
when executing this command in different protocol views; and all the configuration of
the protocol view is displayed when executing this command in protocol sub-views.
Related command: save, reset, saved-configuration, display
current-configuration, display saved-configuration.