3Com Switch 7750 Series
Command Reference Guide – SSH Terminal Service Chapter 1 SSH Terminal Service
Configuration Commands
1-6
Description
Use the peer-public-key end command to return to system view from public key view.
Related command: rsa peer-public-key, public-key-code begin.
Example
# Exit from public key view.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] rsa peer-public-key 3Com003
[3Com-rsa-public-key] peer-public-key end
[3Com]
1.1.6 protocol inbound Syntax
protocol inbound { all | ssh | telnet }
View
VTY user interface view
Parameter
all: Supports all protocols, including Telnet and SSH.
ssh: Supports only SSH.
telnet: Supports only Telnet.
Description
Use the protocol inbound command to configure the protocols supported in the
current user interface.
By default, both SSH and Telnet are supported.
After you use this command with SSH enabled, your configuration cannot take effect
until next login if no RSA key pair is configured.