3Com Switch 7750 Series
Command Reference Guide – Login Chapter 1 Login Commands
1-15
none: Does not check.
odd: Performs odd checks.
space: Performs space checks.
Description
Use the parity command to set the check mode of the user interface.
Use the undo parity command to revert to the default check mode.
Use these two commands in AUX user interface view only.
No check is performed by default.
Example
# Set to perform even checks.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] user-interface aux 0
[3Com-ui-aux0] parity even
1.1.16 protocol inbound Syntax
protocol inbound { all | ssh | telnet }
View
User interface view
Parameter
all: Supports both Telnet protocol and SSH protocol.
ssh: Supports SSH protocol.
telnet: Supports Telnet protocol.
Description
Use the protocol inbound command to specify the protocols supported by the user
interface.
Both Telnet protocol and SSH protocol are supported by default.
Related command: user-interface vty.
Example
# Configure that only SSH protocol is supported in VTY 0.
<3Com> system-view