3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-46
1.2.22 server-type Syntax
server-type { 3Com | standard }
undo server-type
View
RADIUS scheme view
Parameter
3Com: Specifies that the switch supports 3Com's RADIUS server. That is, it is required
that the RADIUS client (on the switch) and the RADIUS server (generally the CAMS)
interact with each other. by using 3Com's proprietary RADIUS protocol (such as the
procedure and packet format)
standard: Specifies to use the standard RADIUS protocol. That is, it is required that the
RADIUS client (on the switch) and the RADIUS server interact with each other following
the procedure and packet format of the standard RADIUS protocol (RFC2865/2866 or
above).
Description
Use the server-type command to specify the RADIUS server type supported by the
switch.
Use the undo server-type command to restore the default RADIUS server type
supported by the switch.
By default, the RADIUS server type of a new RADIUS scheme is standard. The type of
RADIUS server in the default RADIUS scheme "system" is 3Com.
Related command: radius scheme.
Example
# Set the RADIUS server type in RADIUS scheme radius1 to 3Com.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] server-type 3Com
1.2.23 state Syntax
state { primary | secondary } { accounting | authentication } { block | active }