3Com 7750 Series 1.1.10 port-security trap

3Com Switch 7750 Series
Command Reference Guide – Port Security & Port Binding Chapter 1 Port Security Commands
1-14
 Note:
After the port-security intrusion-mode disableport-temporarily command is
executed on a port, the time set by the port-security timer disableport timer
command determines how long the port can be temporarily disabled.
Example
# Set the time during which the system temporarily disables a port to 50 seconds.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] port-security timer disableport 50
1.1.10 port-security trap
Syntax
port-security trap { addresslearned | intrusion | dot1xlogon | dot1xlogoff |
dot1xlogfailure | ralmlogon | ralmlogoff | ralmlogfailure }*
undo port-security trap { addresslearned | intrusion | dot1xlogon | dot1xlogoff |
dot1xlogfailure | ralmlogon | ralmlogoff | ralmlogfailure }*
View
System view
Parameter
addresslearned: Enables/disables the sending of MAC address learning trap
messages.
intrusion: Enables/disables the sending of intrusion packet discovery trap messages.
dot1xlogon: Enables/disables the sending of 802.1x user logon trap messages.
dot1xlogoff: Enables/disables the sending of 802.1x user logoff trap messages.
dot1xlogfailure: Enables/disables the sending of 802.1x user authentication failure
trap messages.
ralmlogon: Enables/disables the sending of RALM user logon trap messages.
ralmlogoff: Enables/disables the sending of RALM user logoff trap messages.
ralmlogfailure: Enables/disables the sending of RALM user authentication failure trap
messages.