3Com 7750 Series Chapter 1 ARP Configuration Commands

3Com Switch 7750 Series
Command Reference Guide – ARP Chapter 1 ARP Configuration Commands
1-1
Chapter 1 ARP Configuration Commands
1.1 ARP Configuration Commands
1.1.1 arp check enable
Syntax
arp check enable
undo arp check enable
View
System view
Parameter
None
Description
Use the arp check enable command to enable the ARP entry checking function, that is,
to disable a switch from creating multicast MAC address ARP entries for MAC
addresses learned.
Use the undo arp check enable command to disable the ARP entry checking function.
In this case, a switch creates multicast MAC address ARP entries for MAC addresses
learned.
By default, the ARP entry checking function is enabled.
Example
# Configure to create multicast MAC address ARP entries for MAC addresses learned.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] undo arp check enable
1.1.2 arp max-entry
Syntax
arp max-entry
undo arp max-entry
View
System view