3Com Switch 7750 Series
Command Reference Guide — Link Aggregation Chapter 1 Link Aggregation Configuration Commands
1-3
Table 1-2 Description on the fields of the display link-aggregation interface
command
Field Description
Attached AggID ID of the aggregation group to which the
specified port belongs
Local:
Port-Priority: 32768, Oper key: 1,
Flag: 0x00
Port priority, operation key and LACP
status flag of the local end
Remote:
System ID: 0x0, 0000-0000-0000
Port Number: 0, Port-Priority: 0,
Oper-key: 0, Flag: 0x00
Device ID, port number, port priority,
operation key and LACP status flag of the
remote end
Received LACP Packets: 0 packet(s),
Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
Statistics about LACP packets, including:
the number of received LACP packets,
the number of illegal LACP packets and
the number of send LACP packets
Syntax
display link-aggregation summary
View
Any view
Parameter
None
Description
Use the display link-aggregation summary command to display summary
information of all aggregation groups, including device ID of the local end, aggregation
group ID, aggregation group type, device ID of the remote end, number of the selected
ports, number of the unselected ports, load sharing type and master port number.
Example
# Display summary information of all aggregation groups.
<3Com> display link-aggregation summary
Aggregation Group Type: D -- Dynamic, S -- Static, M -- Manual
Loadsharing Type: Shar – Loadsharing, NonS – Non-Loadsharing
Actor ID: 0x8000, 00e0-fcff-ff04