3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-11
Description
Use the ipx netbios-propagation command to enable the current VLAN interface to
forward type 20 broadcast packets.
Use the undo ipx netbios-propagation command to disable the current VLAN
interface from forwarding type 20 broadcast packets.
By default, type 20 broadcast packets are not forwarded.
Example
# Allow the current interface to forward type 20 broadcast packets.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2] ipx netbios-propagation
3.1.8 ipx network Syntax
ipx network network
undo ipx network
View
VLAN interface view
Parameter
network: Hexadecimal IPX network number in the range 0x1 to 0xFFFFFFFD. The
leading 0s can be omitted when you input a network number.
Description
Use the ipx network command to assign an IPX network number to the VLAN
interface.
Use the undo ipx network command to delete the IPX network number of the VLAN
interface.
By default, no network number is assigned to VLAN interfaces; therefore, IPX is
disabled on all the VLAN interfaces even after it is enabled globally.
Example
# Assign the network number 675 to VLAN interface 2.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2