3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-28
Example
# Display the information about the OSPF request-queue.
<3Com> display ospf request-queue
OSPF Process 1 with Router ID 1.1.1.1
Request List
The Router's Neighbor is
RouterID: 10.1.1.1 Address: 120.1.1.1
Interface: 120.1.1.2 Area: 0.0.0.0
Request list:
LSID:151.14.83.0 AdvRouter:5.4.0.0 Sequence:8000002a Age:545
LSID:151.10.91.0 AdvRouter:5.4.0.0 Sequence:8000002a Age:545
Table 3-12 Description on the fields of the display ospf request-queue command
Field Description
RouterID Router ID of neighbor router
Address Address of the interface, through which neighbor routers
communicate with the router
Interface Address of the interface on the network segment
Area Area number of OSPF
LSID Link State ID of the LSA
AdvRouter Router ID of the router that advertised the LSA
Sequence Sequence number of the LSA, used to discover old and
repeated LSAs
Age Age of the LSA
Syntax
display ospf [ process-id ] retrans-queue
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command
applies to all current OSPF processes.