3Com Switch 7750 Series
Command Reference Guide – DLDP Chapter 1 DLDP Configuration Commands
1-6
1.1.6 dldp unidirectional-shutdown Syntax
dldp unidirectional-shutdown { auto | manual }
undo dldp unidirectional-shutdown
View
System view
Parameter
auto: Disables the corresponding port automatically when DLDP detects a
unidirectional link.
manual: Prompts the user to disable the corresponding port manually instead of
disabling the port automatically when DLDP detects an unidirectional link. It stops the
DLDP packet sending/receiving on the port at the same time.
Description
Use the dldp unidirectional-shutdown command to set the DLDP handling mode
when a unidirectional link is found.
Use the dldp unidirectional-shutdown command to restore the default setting.
By default, the handling mode of DLDP after unidirectional links are detected is auto.
Related command: dldp work-mode.
Example
# Configure DLDP to automatically disable the corresponding port when a
unidirectional link is found.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dldp unidirectional-shutdown auto
1.1.7 dldp work-mode Syntax
dldp work-mode { enhance | normal }
undo dldp work-mode
View
System view