3Com 7750 Series 1.1.21 stp interface no-agreement-check

3Com Switch 7750 Series
Command Reference Guide – MSTP Chapter 1 MSTP Configuration Commands
1-22
Parameter
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index ranges for this argument.
Description
Use the stp interface mcheck command to perform the mCheck operation on
specified port(s) in system view.
A port on an MSTP-enabled switch toggles to the STP-/RSTP-compatible mode
automatically if an STP-/RSTP-enabled switch is connected to it. But when the
STP-/RSTP-enabled switch is disconnected from the port, the port cannot toggle back
to the MSTP mode automatically. In this case, you can force the port to toggle to the
MSTP mode by performing the mCheck operation on the port.
Related command: stp mcheck, and stp mode.
Example
# Perform the mCheck operation for Ethernet1/0/3 port in system view.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] stp interface Ethernet 1/0/3 mcheck
1.1.21 stp interface no-agreement-check
Syntax
stp interface interface-type interface-number no-agreement-check
undo stp interface interface-type interface-number no-agreement-check
View
System view
Parameter
interface-type: Port type.
interface-number: Port number.
Description
Use the stp interface no-agreement-check command to enable the rapid transition
feature on a specified port.
Use the undo stp interface no-agreement-check command to disable the rapid
transition feature on a specified port.