3Com Switch 7750 Series
Command Reference Guide – Extended VLAN Applications Chapter 1 Voice VLAN Configuration Commands
1-3
Caution:
The “Current voice vlan enable port mode” field lists the ports with the voice VLAN
function enabled. Note that a port listed in this field may not currently operate in a voice
VLAN. To check the ports operating in the current voice VLAN, use the display vlan
command, which is described in section1.1.3 ”display vlan”.
Syntax
display vlan vlan-id
View
Any view
Parameter
vlan-id: Voice VLAN ID in the range of 1 to 4094.
Description
Use the display vlan command to display the automatic/manual ports in the current
voice VLAN.
Related command: voice vlan.
Example
# Display the ports included in the current voice VLAN, assuming that the current voice
VLAN is VLAN 6.
<3Com> display vlan 6
VLAN ID: 6
VLAN Type: static
Route Interface: not configured
Description: VLAN 0006
Name: VLAN 0006
Tagged Ports:
GigabitEthernet1/0/5
Untagged Ports:
GigabitEthernet1/0/6
The output indicates that GigabitEthernet1/0/5 and GigabitEthernet1/0/6 ports are in
the current voice VLAN.