3Com Switch 7750 Series
Command Reference Guide – Port Security & Port Binding Chapter 1 Port Security Commands
1-6
[3Com] interface GigabitEthernet1/0/1
# Configure the switch to disable GigabitEthernet1/0/1 when intrusion protection is
triggered on the port.
[3Com-GigabitEthernet1/0/1] port-security intrusion-mode disableport
1.1.4 port-security authorization ignore Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Ethernet port view
Parameter
None
Description
Use the port-security authorization ignore command to configure the port to ignore
the authorization information delivered by the RADIUS server.
Use the undo port-security authorization ignore command to restore the default
configuration.
By default, the port uses (does not ignore) the authorization information delivered by
the RADIUS server.
z With the port-security authorization ignore command executed, issuing the
display port-security interface command will display "Authorization is ignore" in
the output information.
z With the undo port-security authorization ignore command executed, issuing
the display port-security interface command will display "Authorization is
permit" in the output information.
Example
# Configure GigabitEthernet1/0/2 to ignore the authorization information delivered from
the RADIUS server.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface GigabitEthernet1/0/2
[3Com-GigabitEthernet1/0/2] port-security authorization ignore