3Com Switch 7750 Series
Command Reference Guide – Port Security & Port Binding Chapter 1 Port Security Commands
1-2
AddressLearn trap is Enabled
Intrusion trap is Enabled
Dot1x logon trap is Enabled
Dot1x logoff trap is Enabled
Dot1x logfailure trap is Enabled
RALM logon trap is Enabled
RALM logoff trap is Enabled
RALM logfailure trap is Enabled
Vlan id assigned is NULL
Disableport Timeout: 20 s
OUI value:
Index is 5, OUI value is 00efec
GigabitEthernet1/0/1 is link-down
Port mode is Userlogin
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableport
Max mac-address num is 100
Stored mac-address num is 0
Authorization is permit
(Any display that follows is omitted.)
Table 1-1 Description on the fields of the display port-security command
Field Description
Equipment port security is enabled Port security is enabled on the switch.
AddressLearn trap is Enabled The sending of address-learning trap
messages is enabled.
Intrusion trap is Enabled The sending of intrusion-detection trap
messages is enabled.
Dot1x logon trap is Enabled The sending of 802.1x user
authentication success trap messages is
enabled.
Dot1x logoff trap is Enabled The sending of 802.1x user logoff trap
messages is enabled.
Dot1x logfailure trap is Enabled The sending of 802.1x user
authentication failure trap messages is
enabled.
RALM logon trap is Enabled The sending of RALM authentication
success trap messages is enabled.
RALM logoff trap is Enabled The sending of RALM logoff trap
messages is enabled.
RALM logfailure trap is Enabled The sending of RALM authentication
failure trap messages is enabled.