3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-68
Example
# Configure the secondary authorization server.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] secondary authorization 10.163.155.13 49
1.3.17 stop-accounting-buffer enable Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
View
HWTACACS scheme view
Parameter
None
Description
Use the stop-accounting-buffer enable command to enable the switch to buffer the
stop-accounting requests that bring no response.
Use the undo stop-accounting-buffer enable command to disable the switch from
buffering the stop-accounting requests that bring no response.
By default, the switch is enabled to buffer the stop-accounting requests that bring no
response.
Stop-accounting requests are critical to billing and will eventually affect the charges;
they are important for both the users and the ISP. Therefore, the switch should do its
best to transmit them to the HWTACACS accounting server. If the HWTACACS
accounting server does not respond to such a request, the switch should first buffer the
request on itself, and then retransmit the request to the HWTACACS accounting server
until it gets a response, or the maximum number of transmission attempts is reached (in
this case, it discards the request).
Related command: reset stop-accounting-buffer, hwtacacs scheme, and display
stop-accounting-buffer.
Example
# Enable the switch to buffer the stop-accounting requests that bring no response from
the servers in HWTACACS scheme test1.
<3Com> system-view