3Com 7750 Series 1.3.3 terminal debugging

3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging Chapter 1 Basic System Configuration & Debugging Commands
1-13
z Output information to the Console.
z Output information to a file.
You can choose one according to the prompt of the system.
Example
# Display operation information about ARP module, output the information to the file
diaginfo.txt and save the file to the Flash memory.
<3Com > display diagnostic-information ARP
Redirect it to file?[Y/N]y
Please input the file name(*.txt)[flash:/diaginfo.txt]:
This operation may take a few minutes, continue?[Y/N]y
Writing diagnostic information to flash:/diaginfo.txt now.
.......
<3Com>
1.3.3 terminal debugging
Syntax
terminal debugging
undo terminal debugging
View
User view
Parameter
None
Description
Use the terminal debugging command to enable terminal display for debugging
information.
Use the undo terminal debugging command to disable terminal display for debugging
information.
By default, terminal display for debugging information is disabled.
Related command: debugging.
Example
# Enable terminal display for debugging information.
<3Com> terminal debugging