3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-24
Table 3-8 Description on the fields of the display ospf lsdb ase command
Field Description
type Type of the LSA
ls id Link state ID of the LSA
adv rtr Router ID of the router that
advertises the LSA
ls age Age of the LSA
len Length of the LSA
seq# Sequence number of the
LSA
chksum Checksum of the LSA
Options Options of the LSA
Net mask Network mask
E type Type of external route
Forwarding Address Forwarding address
Tag Tag
Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
Description
Use the display ospf nexthop command to display the OSPF next-hop information.
Example
# Display the OSPF next-hop information.
<3Com> display ospf nexthop
OSPF Process 1 with Router ID 2.2.2.2