3Com Switch 7750 Series
Command Reference Guide – PoE Chapter 1 PoE Configuration Commands
1-7
Description
Use the display poe pse command to display the parameters of all boards that serve
as power sourcing equipment (PSE).
Example
# Display the parameters of all boards that serve as PSE on the switch.
<3Com> display poe pse
PSE Information of board 4:
Power Current Value :450 W
Power Max Value :806 W
Power Peak Value :700 W
Power Average Value :475 W
Software Version :290
Hardware Version :000
CPLD Version :000
Table 1-3 Description on the fields of the display poe pse command
Field Description
Power Current Value Current power of the board
Power Max Value Maximum power of the board
Power Peak Value Peak power of the board
Power Average Value Average power of the board
Software Version Version of the PSE software
Hardware Version Version of the PSE hardware
CPLD Version Version of the PSE complex programmable
logic device (CPLD)
Syntax
poe enable
undo poe enable
View
Ethernet port view
Parameter
None