3Com 7750 Series 2.1.5 habp server vlan , 2.1.6 habp timer

3Com Switch 7750 Series
Command Reference Guide – 802.1x Chapter 2 HABP Configuration Commands
2-4
If an 802.1x-enabled switch does not have HABP enabled, it cannot manage the
switches attached to it.
Example
# Enable HABP.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] habp enable
2.1.5 habp server vlan
Syntax
habp server vlan vlan-id
undo habp server
View
System view
Parameter
vlan-id: VLAN ID, ranging from 1 to 4,094.
Description
Use the habp server vlan command to configure a switch to operate as an HABP
server and HABP packets to be broadcast in specified VLAN.
Use the undo habp server vlan command to revert to the default HABP mode.
By default, a switch operates as an HABP client.
To specify a switch to operate as an HABP server, you need to enable HABP (using the
habp enable command) for the switch first. Even if HABP is not enabled, the client can
still configure the switch to work as an HABP client, although this has no effect.
Example
# Specify the switch to operate as an HABP server and the HABP packets to be
broadcast in VLAN 2.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] habp server vlan 2
2.1.6 habp timer
Syntax
habp timer interval