3Com Switch 7750 Series
Command Reference Guide – MSTP Chapter 1 MSTP Configuration Commands
1-8
1.1.7 reset stp Syntax
reset stp [ interface interface-list ]
View
User view
Parameter
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index ranges for this argument.
Description
Use the reset stp command to clear spanning tree-related statistics on Ethernet ports.
The spanning tree statistics include the numbers of the TCN BPDUs, configuration
BPDUs, RST BPDUs, and MST BPDUs sent/received through one or more specified
ports or all ports (note that STP BPDUs and TCN BPDUs are counted only for CISTs.)
This command clears the spanning tree-related statistics on specified ports if you
specify the interface-list argument. If you do not specify the interface-list argument, this
command clears the spanning tree-related statistics on all ports.
Related command: display stp.
Example
# Clear the spanning tree-related statistics on ports Ethernet1/0/1 through
Ethernet1/0/3.
<3Com> reset stp interface Ethernet 1/0/1 to Ethernet 1/0/3
1.1.8 revision-level Syntax
revision-level level
undo revision-level
View
MST region view
Parameter
level: MSTP revision level to be set for the switch. This argument ranges from 0 to
65,535.