3Com 7750 Series 5.1.4 compare-different-as-med

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 5 BGP Configuration Commands
5-4
Use the undo balance command to cancel the load balance configuration.
Example
# Configure BGP load balance.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] balance 2
5.1.4 compare-different-as-med
Syntax
compare-different-as-med
undo compare-different-as-med
View
BGP view
Parameter
None
Description
Use the compare-different-as-med command to enable comparison of MED values
from different AS neighboring routes when determining the best route.
Use the undo compare-different-as-med command to disable the comparison.
By default, it is not allowed to compare the MED attribute values from the routing
paths of different AS peers.
If there are several routes available to one destination address, the route with a
smaller MED can be selected as the final route.
Do not use this command unless it is determined that the same IGP and routing
selection mode are adopted by different autonomous systems.
Example
# Enable comparison of MED values from different AS neighboring routes.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] compare-different-as-med