3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-3
Note:
If the accounting optional switch is turned on (with the accounting optional command)
in the ISP domain to which the local user belongs or the RADIUS scheme referenced
by the ISP, you cannot limit the number of accesses by the local user. That is, the
attribute access-limit command does not take effect.
Related command: display local-user.
Example
# Set the IP address of 3Com1 to 10.110.50.1.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] local-user 3Com1
[3Com-luser-3Com1] attribute ip 10.110.50.1
1.1.3 cut connection Syntax
cut connection { all | access-type dot1x | domain domain-name | interface
interface-type interface-number | ip ip-address | mac mac-address | radius-scheme
radius-scheme-name | vlan vlan-id | ucibindex ucib-index | user-name user-name }
View
System view
Parameter
all: Cuts down all user connections
access-type dot1x: Cuts down all 802.1x user connections.
domain isp-name: Cuts down all user connections in the specified ISP domain.
isp-name is the name of an ISP domain. It is a character string of up to 24 characters.
You can only specify an existing ISP domain.
interface interface-type interface-number: Cuts down all user connections to the
specified port.
ip ip-address: Cuts down the connection of the user with the specified IP address.
mac mac-address: Cuts down the user connection with the specified MAC address.
mac-address is in dash-delimited hexadecimal notation, that is, in the H-H-H format.
radius-scheme radius-scheme-name: Cuts down all user connections using the
specified RADIUS scheme. radius-scheme-name is a character string of up to 32
characters.