3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-65
Parameter
retry-times: Maximum number of real-time stop-accounting request attempts. It is in the
range 1 to 300 and defaults to 100.
Description
Use the retry stop-accounting command to enable stop-accounting packet
retransmission and configure the maximum number of stop-accounting request
attempts.
Use the undo retry stop-accounting command to restore the default setting.
By default, stop-accounting packet retransmission is enabled and has 100 attempts for
each request.
Related command: reset stop-accounting-buffer, hwtacacs scheme, and display
stop-accounting-buffer.
Example
# Enable stop-accounting packet transmission and allow up to 50 attempts for each
request.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] retry stop-accounting 50
1.3.14 secondary accounting Syntax
secondary accounting ip-address [ port ]
undo secondary accounting
View
HWTACACS scheme view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal notation.
port: Port number of the server, which is in the range of 1 to 65535 and defaults to 49.
Description
Use the secondary accounting command to configure a secondary TACACS
accounting server.
Use the undo secondary accounting command to delete the configured secondary
TACACS accounting server.