3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 7 Route Capacity Configuration Commands
7-2
Table 7-1 Description on the fields of the display memory command
Field Description
System Total Memory(bytes) Free memory size, in bytes, of the switch
Total Used Memory(bytes) Occupied memory size, in bytes, of the
switch
Used Rate Memory occupation rate
Syntax
display memory limit
View
Any view
Parameter
None
Description
Use the display memory limit command to display the memory setting and state
information related to route capacity.
This command displays the current memory limit configuration, free memory, and
state information about connections, such as times of disconnection, times of
reconnection, and whether the current state is normal.
Example
# Display the current memory setting and state information.
<3Com>display memory limit
Current memory limit configuration information:
system memory safety: 40 (MBytes)
system memory limit: 30 (MBytes)
auto-establish enabled
Free Memory: 111571652 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal