3Com Switch 7750 Series
Command Reference Guide – ACL Chapter 1 ACL Commands
1-3
Parameter
ip-based: Performs traffic classification based on Layer 3 information.
link-based: Performs traffic classification based on Layer 2 information.
Description
Use the acl mode command to set the traffic classification mode for the device.
By default, traffic classification is performed based on Layer 3 information.
Related command: acl.
Note:
This configuration is only effective on A type cards.
Example
# Specify to perform traffic classification based on Layer 3 information.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] acl mode ip-based
1.1.3 acl order Syntax
acl order { auto | first-config-first-match | last-config-first-match }
View
System view
Parameter
auto: Specifies the ACL rules sent to a port are match according to the depth-first
order.
first-config-first-match: Specifies the ACL rules sent to a port are matched according
to the sending order: first sent, first matched.
last-config-first-match: Specifies the ACL rules sent to a port are matched according
to the sending order: last sent, first matched.
Description
Use the acl order command to set the match order for the ACL rules sent to a port.