3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON Chapter 1 SNMP Configuration Commands
1-11
View
System view
Parameter
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
groupname: Group name, ranging from 1 to 32 bytes.
authentication: Configures to authenticate the packet without encryption.
privacy: Configures to authenticate and encrypt the packet.
read-view: Sets read-only view.
read-view: Read-only view name, ranging from 1 to 32 bytes
write-view: Sets read-write view
write-view: Name of read-write view, ranging from 1 to 32 bytes.
notify-view: Sets notify view.
notify-view: Notification view name, ranging from 1 to 32 bytes.
acl: Sets an ACL.
acl-number: Indicates an ACL, ranging from 2,000 to 2,099.
Description
Use the snmp-agent group command to configure a new SNMP group, that is, to map
SNMP user to SNMP view.
Use the undo snmp-agent group command to cancel a specified SNMP group.
By default, the SNMP group configured with the snmp-agent group v3 command is
not authenticated and encrypted.
Related command: snmp-agent mib-view, snmp-agent usm-user.
Example
# Create SNMPv3 group hello.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent group v3 hello
1.1.12 snmp-agent local-engineid Syntax
snmp-agent local-engineid engineid