3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-20
Description
Use the service-type command to authorize the user to access the specified type(s) of
service(s).
Use the undo service-type command to inhibit the user from accessing the specified
type(s) of service(s).
By default, the user is inhibited from accessing any type of service.
Example
# Authorize 3Com1 to access the lan-access service.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] local-user 3Com1
[3Com-luser-3Com1] service-type lan-access
1.1.19 state
Syntax
state { active | block }
View
ISP domain view or local user view
Parameter
active: Activates the current ISP domain (in ISP domain view) or current user (in local
user view), to allow users in current ISP domain or current user to access the network.
block: Hangs up the current ISP domain (in ISP domain view) or current user (in local
user view), to inhibit users in current ISP domain or current user from accessing the
network.
Description
Use the state command to set the status of current ISP domain or the status of the local
user.
By default, an ISP domain is in the active state once it is created (in ISP domain view),
and a local user is in the active state once the user is created (in local user view).
In ISP domain view, each ISP domain can be in one of two states: active and block.
Users in an active ISP domain are allowed to access the network. After an ISP domain
is set to the block state, except the online users, the users under this domain are not
allowed to access the network.
Related command: domain.