3Com 7750 Series 1.1.14 poe upgrade

3Com Switch 7750 Series
Command Reference Guide – PoE Chapter 1 PoE Configuration Commands
1-14
By default, the PoE priority of a port is low.
Note:
This command is used together with the poe power-management command, and
takes effect when the PoE power output of the switch reaches nearly to its maximum
value.
Example
# Set the PoE priority of Ethernet3/0/1 to critical.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet 3/0/1
[3Com-Ethernet3/0/1] poe priority critical
1.1.14 poe upgrade
Syntax
poe upgrade { refresh | full } filename
View
System view
Parameter
refresh: Upgrades the existing valid software in the PSE in the refresh mode.
full: Reloads the software to the PSE when there is no valid software in the PSE.
filename: Upgrade file name, with a length of 1 character to 63 characters.
Description
Use the poe upgrade command to update the processing software in the PSE online.