3Com Switch 7750 Series
Command Reference Guide – DLDP Chapter 1 DLDP Configuration Commands
1-2
dldp link state : down
The neighbor number of the port is 0.
interface GigabitEthernet2/0/2
dldp port state : advertisement
dldp link state : up
The neighbor number of the port is 1.
neighbor mac address : 00e0-fc27-750d
neighbor port index : 98
neighbor state : two way
neighbor aged time : 24
1.1.2 dldp
Syntax
dldp { enable | disable }
View
System view, Ethernet port view
Parameter
None
Description
In system view:
Use the dldp enable command to enable DLDP globally on all optical ports of the
switch.
Use the dldp disable command to disable DLDP globally on all optical ports of the
switch.
In Ethernet port view:
Use the dldp enable command to enable DLDP on the current port.
Use the dldp disable command to disable DLDP on the current port.
The commands apply to both non-optical ports and optical ports.
By default, DLDP is disabled.