3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-50
1.2.26 timer quiet Syntax
timer quiet minutes
undo timer quiet
View
RADIUS scheme view
Parameter
minutes: Wait time, ranging from 1 minute to 255 minutes. By default, it is 5 minutes.
Description
Use the timer quiet command to set the wait time for the primary server to restore the
active state.
Use the undo timer quiet command to restore the default wait time.
Wait time works as follows:
The switch sends a RADIUS packet to the primary RADIUS server.
After confirming that no response will be received from the primary server, the switch
starts to send RADIUS packets to the secondary RADIUS server.
At the interval of wait time, the switch sets the state of the primary server to active and
sends RADIUS packets to the primary server.
Example
# Set the wait time for the RADIUS scheme "radius1" to three minutes.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] timer quiet 3
1.2.27 timer realtime-accounting Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
RADIUS scheme view