3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands Chapter 1 Port Basic Configuration Commands
1-3
Description
Use the copy configuration command to copy the configuration on a port to some
other ports to keep consistent configuration on them.
Note:
Any aggregation group port you input in the destination port list will be removed from
the list and the copy command will not take effect on the port. If you want an
aggregation group port to have the same configuration with the source port, you can
specify the aggregation group of the port as the destination (with the destination-agg-id
argument).
Example
# Copy the configuration of Ethernet3/01 to Ethernet3/0/2.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] copy configuration source Ethernet3/0/1 destination Ethernet3/0/2
The operation will be invalid for some special port(s) in the destination port
list, such as aggregation port.
Copying VLAN configuration...
Copying Protocol based VLAN configuration...
Copying LACP configuration...
Copying QOS configuration...
Copying STP configuration...
Copying speed/duplex configuration...
Port configuration copy complete
1.1.3 description Syntax
description text
undo description
View
Ethernet port view