3Com Switch 7750 Series
Command Reference Guide – QoS Chapter 1 QoS Commands
1-20
By default, the SP algorithm is adopted.
Related command: display qos-interface queue-scheduler.
Note:
Only non-type-A LPUs support the configuration of queue scheduling mode.
Example
# Adopt the WRR queue scheduling mode, and the weight value of each queue is 10, 5,
10, 10, 5, 10, 5, and 10.
<3Com> system-view
[3Com] interface GigabitEthernet1/0/1
[3Com-GigabitEthernet1/0/1] qos
[3Com-qosb-GigabitEthernet1/0/1] queue-scheduler wrr 10 5 10 10 5 10 5 10
1.1.20 reset traffic-statistic Syntax
I. For type-A LPUs:
reset traffic-statistic { inbound | outbound } acl-rule [ system-index ]
II. For non-type-A LPUs:
reset traffic-statistic inbound acl-rule [ system-index ]
Note:
LPUs support applying the combination of IP ACL rules and link ACL rules. However,
the field defined by the IP ACL rules and link ACL rules cannot be of more than 32
characters. Otherwise, the combination cannot be applied successfully.
View
QoS view