3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-10
Parameter
channel: Configure the channel to output information to buffer.
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
size buffersize: Specifies the size of the log buffer (number of messages the buffer
holds). The buffersize argument ranges from 0 to 1024 and defaults to 512.
|: Filters output log information with a regular expression.
exclude: Displays the log information excluding the specified characters.
regular-expression: Regular expression.
For special characters used in the regular expression, refer to Table 1-3.
Description
Use the info-center logbuffer command to configure information output to the log
buffer.
Use the undo info-center logbuffer command to cancel the configuration.
By default, the system outputs information to the log buffer, which can hold 512
records.
This command takes effect only when the information center function is enabled for
the system.
Related command: info-center enable and display info-center.
Example
# Send log information to log buffer and sets the size of log buffer to 50.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center logbuffer size 50
1.1.10 info-center loghost Syntax
info-center loghost host-ip-addr [ channel { channel-number | channel-name } ]
[ facility local-number ] [ language { chinese | english } ] *
undo info-center loghost host-ip-addr