3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-13
Description
Use the ipx rip mtu command to configure the IPX RIP update packet size.
Use the undo ipx rip mtu command to restore the default size.
By default, the default size of IPX RIP update packets is 432 bytes.
Example
# Set the maximum RIP update packet size to 500 bytes on VLAN interface 2.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2]ipx rip mtu 500
3.1.11 ipx rip multiplier Syntax
ipx rip multiplier multiplier
undo ipx rip multiplier
View
System view
Parameter
multiplier: A multiplier of the update interval, decides the aging period of the RIP
routing entries together with the update interval. It is in the range 1 to 1000. Multiplying
the update interval by the multiplier, you can get the actual aging period.
Description
Use the ipx rip multiplier command to configure the aging period of the IPX RIP
routing entries.
Use the undo ipx rip multiplier command to restore the default value. The aging
period of IPX RIP is a multiple of the IPX RIP update interval. You can set multiple
update intervals as an aging period.
By default, the aging period of the IPX RIP routing entries is three times the RIP
updating interval.
Related command: ipx rip timer update
Example
# Set the RIP aging period of the routing entries to five times the update interval.
<3Com>system-view
System View: return to User View with Ctrl+Z.