3Com 7750 Series 1.1.8 test-type

3Com Switch 7750 Series
Command Reference Guide – Remote Ping Chapter 1 Remote Ping Commands
1-8
Description
Use the test-enable command to execute an Remote Ping test.
Use the undo test-enable command to disable an Remote Ping test.
 Note:
After you execute the test-enable command, the system does not display the test
result. You may view the test result information by executing the display remote ping
command.
Related command: display remote ping.
Example
# Execute the Remote Ping test defined by the test group “administrator-icmp”.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] remote ping administrator icmp
[3Com-remote ping-administrator-icmp] test-enable
1.1.8 test-type
Syntax
test-type type
View
Remote Ping test group view
Parameter
type: Test type.
Description
Use the test-type command to configure the type of the test.
Currently the system only supports ICMP test.
Example
# Set test type of the “administrator-icmp” test group to ICMP.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] remote ping administrator icmp