3Com 7750 Series 2.1.5 slave update configuration

3Com Switch 7750 Series
Command Reference Guide – VRRP & HA Chapter 2 HA Configuration Commands
2-3
View
User view
Parameter
None
Description
Use the slave switchover command to perform master/slave switchover manually.
When the slave board operates normally and the master board is in the real-time
backup state, if you want the slave board to operate in place of the master board, you
can use this command to implement master/slave switchover. After that, the slave
board becomes the new master board and controls the system, and the original master
board restarts automatically.
Example
# Perform master/slave switchover manually.
<3Com> slave switchover
Caution!!! Confirm switch slave to master[Y/N]?y
Starting.....
RAM Line....OK
2.1.5 slave update configuration
Syntax
slave update configuration
View
User view
Parameter
None
Description
Use the slave update configuration command to synchronise the configurations files
on master/slave board.
You can use this command to manually synchronize the configuration files on the
master board to the slave board.
Example
# Synchronize the configuration files on the master board to the slave board.
<3Com> slave update configuration