3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 2 RIP Configuration Commands
2-11
2.1.11 preference Syntax
preference value
undo preference
View
RIP view
Parameter
value: Preference level, ranging from 1 to 255. By default, the value is 100.
Description
Use the preference command to configure the route preference of RIP.
Use the undo preference command to restore the default preference.
Every routing protocol has its own preference. Its default value is determined by the
specific routing policy. The preferences of routing protocols will finally determine
which routing algorithm's routes will be selected as the optimal routes in the IP routing
table. You can use this command to modify the RIP preference manually.
Example
# Specify the RIP preference as 20.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] rip
[3Com-rip] preference 20
2.1.12 reset Syntax
reset
View
RIP view
Parameter
None
Description
Use the reset command to reset the system configuration parameters of RIP.