3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-13
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center monitor channel command to set the channel through which
information is output to user terminals.
Use the undo info-center monitor channel command to restore the default channel
through which the information is output to user terminals.
By default, the system outputs information to user terminal.
This command takes effect only when the information center function is enabled.
Related command: info-center enable and display info-center.
Example
# Configure channel 0 to output log information to user terminal.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center monitor channel 0
1.1.13 info-center snmp channel Syntax
info-center snmp channel { channel-number | channel-name }
undo info-center snmp channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center snmp channel command to set the channel through which
information is output to the SNMP.
Use the undo info-center snmp channel command to restore the default channel
through which information is output to the SNMP.